Turtle Wax’s Hybrid Solutions Pro line offers game-changing products for car detailers who want the absolute best, pro-level finish: To The Max WaxFlex Wax, and 1 & Done Compound Correct and Finish, along with ALL-NEW All Wheel Cleaner + Iron Remover and Pure Wash.

The two waxes, To The Max Wax and Flex Wax, contain a unique graphene-infused formula, which provides a tighter web of protection and an intense shine, while 1 & Done is an unstoppable compound that corrects and finishes any paint surface, ultimately achieving different cut levels through nothing more than switching pads.

As for Turtle Wax’s latest Pro innovations, All Wheel Cleaner + Iron Remover quickly decontaminates both wheels and paintwork without the irritating chemical odour that often comes with similar products. Meanwhile, Pure Wash is a versatile, extreme-foaming, pH-neutral wash that doubles as a synthetic clay lubricant.

In this article, we’re going to take a closer look at these intriguing new products and how the entire Hybrid Solutions Pro line can help you take your car detailing routine to the next level.

Ultimate cleaning experience: Hybrid Solutions Pro Pure Wash

Turtle Wax Hybrid Solutions Pro Pure Wash - 1.42 Ltr

Whether you’re a detailer or an enthusiast, Hybrid Solutions Pro Pure Wash is a must-have in your arsenal. Formulated with unique Slick & Slide polymers, this lubricious pH-neutral wash delivers an amazing in-use experience and an outstanding final result. Its rich, thick foam effortlessly tackles tough road grime and traffic film without stripping waxes and existing coatings, whilst surrounding you with a pleasant fruity scent. Pure Wash is incredibly versatile, as well – not only can it be used with a bucket or foam sprayer, it also delivers excellent lubrication for synthetic clay in the mechanical decontamination process to save time.

Key Features:

  • Extremely slick and lubricious formula for swirl proof wash
  • Thick clinging foam and effective pH-neutral surfactants thoroughly clean traffic dirt without breaking down protective coatings or waxes
  • Versatile application – bucket wash, snow foam canon or as a synthetic clay lubricant
  • Easy to rise off
  • Enticing fruity scent

How to Apply:

  1. Rinse vehicle thoroughly and use out of direct sunlight.
  2. Applying with a snow foam canon: Add 100ml to your foam dispenser and mix with 1L of warm water. Apply from top to bottom and agitate with microfibre wash mitt one panel at a time. Rinse mitt regularly in a bucket of clean water. Rinse vehicle and towel dry.
  3. Mechanical decontamination: Use same dilution ratio of 100ml Pure Wash per 1L of water. Using your synthetic clay mitt or towel rub over clear coat surface in a back-and-forth motion only, one panel at a time. Rinse regularly in a bucket of clean water. Rinse vehicle and towel dry.
  4. Bucket wash: Add 30ml to a 10L bucket. Fill bucket with a strong stream of water. Wash vehicle from top to bottom. Rinse and towel dry.

Rapid decontamination: Hybrid Solutions Pro All Wheel Cleaner + Iron Remover

Turtle Wax Hybrid Solutions PRO All Wheel Cleaner + Iron Remover 750ml 620670

Hybrid Solutions Pro All Wheel Cleaner + Iron Remover is one of the most-requested innovations in the range. Rapid-Decon technology quickly removes fallout and iron-based contaminants from paintwork and wheels, dissolving below-the-surface contaminants such as rail dust and iron oxides. Watch the formula turn purple as it tackles road grime and stubborn contaminants. Finally, its Scent-Lock Neutralizer blocks the unpleasant chemical odour, making the decontamination process a much more enjoyable experience.

Key Features:

  • Industry’s first Iron remover that effectively blocks the chemical odour from iron-removing chemistry
  • Rapid-Decon Technology for faster results
  • Turns purple as it cleans brake dust and industrial fallout
  • Safe to use on all surfaces: all types of gloss paint, clear coat finishes, polished metal, chrome, glass, and wheels

How to apply

  1. Shake Well. Begin with a cool dry surface when applying. For use on painted surfaces, wash and towel dry first.
  2. Wheel Cleaning: Spray enough product to thoroughly cover the entire wheel. Let dwell for 2-4 minutes. Do not allow product to dry. Spray with a powerful stream of water and towel dry.
  3. Paint Decontamination: Wash and dry vehicle. Mist the product over the vehicles paint. Let dwell for 2-4 minutes. Do not allow product to dry. Spray with a powerful stream of water and towel dry.

NOTE: For heavy contamination and neglected paint, agitation may be required.

Unreal performance: Hybrid Solutions Pro To The Max Wax

Turtle Wax Hybrid Solutions Pro Graphene To The Max Wax 460646

Hybrid Solutions Pro To The Max Wax is not only Turtle Wax’s most durable liquid car wax for professionals and enthusiasts alike, but Pro To The Max Wax also contains the company’s unique graphene-infused formula for added protection and shine.

Graphene is a layer of carbon atoms arranged in a honeycomb shape and it provides a beautiful web of protection. When used in car detailing, graphene provides a strong level of chemical resistance and intensifies shine and protection. Turtle Wax has combined graphene with its other key additives, which include superhydrophobic polymers, UV absorbers and chemical resistant polymers, to create a tighter web of protection.

What you see as a user is amazing depth of colour, insane gloss levels, greater chemical resistance, greater water repellence, increased UV protection and increase slickness. All in all, a cleaner, more protected finish.

Key features

  • Durable and professional-grade liquid car wax.
  • Patent-pending graphene infusion creates a tighter web of protection.
  • Easy-on and easy-off liquid includes UV absorbers and shields painted surfaces, preventing discolouration and damage.
  • Chemical resistant, super-hydrophobic polymers glide on easily for maximum gloss, water beading and stain prevention.

How to apply

  1. Begin by washing and rinsing your vehicle thoroughly. If needed, use a clay bar and polish to remove any contaminants, embedded dirt, scratches and swirl marks. You can also use Hybrid Solutions Pro 1 & Done Compound Correct and Finish to remove any paint imperfections you find (more on that later).
  2. Applying by hand: apply three drops of Pro To The Max Wax to an applicator pad and spread it evenly over a 2’ x 2’ panel in overlapping, circular movements.
  3. Applying by machine: apply four drops onto a foam buffing pad and slowly spread the wax over a 2’ x 2’ panel using a low setting. It’s really important not to over-apply the wax and to bear in mind that less product will be needed for each section as the applicator pad gets saturated.
  4. Wait 2-3 minutes to allow the product to dry and haze.
  5. With a fresh microfibre towel, wipe any excess wax from your car’s surface. Use light, back-and-forth motions.
  6. Work in 2’ x 2’ sections until you’ve covered the whole surface of the car.
  7. Use a damp microfibre towel to remove any streaks or residual wax and then finish by wiping your car with a dry microfibre towel.

How to maintain

Allow your paint to cure for 24 hours before washing. Then apply an additional coat of Pro To The Max Wax as needed or use Hybrid Solutions Pro Flex Wax to maintain that professional performance and guarantee year-round protection.

Versatile protection: Hybrid Solutions Pro Flex Wax

Turtle Wax Hybrid Solutions Pro Graphene Flex Wax 460638

Hybrid Solutions Pro Flex Wax spray wax also includes Turtle Wax’s unique graphene-infused formula, providing a tighter web of protection, incredible gloss, slickness, a high level of water repellence, UV protection and more.

What sets Pro Flex Wax apart is its versatility. Firstly, the spray can be used to deliver a durable base coating, Secondly, it can be used as a topper to maintain long-last professional performance. And thirdly, it can be used on both dry and wet surfaces for unrivalled defence against UV rays and chemicals.

Key features

  • Durable and professional-grade spray car wax.
  • Patent-pending graphene infusion creates a tighter web of protection.
  • Versatile and can be used as a base coating or topper.
  • Easy-on and easy-off wax can be applied on dry or wet paint, glass, wheels and plastics.
  • Chemical resistant, super-hydrophobic polymers glide on easily for maximum gloss, water beading and stain prevention.

How to apply

  1. Begin by washing and rinsing your vehicle thoroughly. If needed, use clay bar and polish to remove any contaminants, embedded dirt, scratches and swirl marks. You can also use Hybrid Solutions Pro 1 & Done Compound Correct and Finish to remove any paint imperfections you find (more on that later).
  2. Base coat: dry your car and apply two sprays per panel. Use a clean microfibre cloth to spread and wipe the spray across the surface, then use a separate microfibre cloth to remove any residue. You can also use a damp microfibre cloth to remove any high spots or streaking.
  3. Quick, one-step wax: while your car is still wet, apply two sprays per panel and towel-dry all the treated surfaces. Finally, use a damp microfibre cloth to remove any streaking or residue.
  4. Rinse wax: while your car is still wet, apply two sprays per panel. Starting at the roof, use a strong stream of water to spread and rinse the wax. Towel-dry all the treated surface and use a damp microfibre cloth to remove any streaking or residue.

Quick perfection: 1 & Done Compound Correct and Finish

Turtle Wax Hybrid Solutions Pro 1 & Done Compound Correct & Finish 460662

The final product in the Hybrid Solutions Pro line is the Hybrid Solutions Pro 1 & Done Compound Correct and Finish. The precision platelet technology within this protect allows professional detailers and enthusiasts alike to correct and finish any paint surface without having to switch products.

With the Pro 1 & Done Compound you can eliminate deep scratches and swirl marks while adding a wet, reflective polish to any clear coat. All you need to do is swap your cutting pad to use Pro 1 & Done as a heavy-duty compound or a light polish. It’s a truly one-stop-shop for all of your paint correcting and finishing needs.

Key features

  • Professional polishing compound with a proprietary blend of high-quality precision platelet abrasives.
  • Removes up to 1,000 grit paint imperfections for heavy-duty surface restoration.
  • Performs a heavy-duty cut or an ultra-fine polish, depending on which pad is used.
  • Body shop safe formula produces no dust, has an extended working time, produces no sling and is easy to wipe off.

How to apply

  1. Begin by washing and rinsing your vehicle thoroughly. If needed, use clay to remove any contaminants and embedded dirt.
  2. Apply 3-4 drops of compound onto a wool pad or heavy cutting foam pad.
  3. Spread the product evenly over a 2’ x 2’ panel, applying light-to-medium pressure in a crosshatch pattern. It’s important to use the appropriate speed and pad for the type of polisher that you’re using.
  4. Remove any excess product with a clean, dry microfibre cloth.
  5. For final polishing, apply a further 3-4 drops of compound to a medium polishing or light finishing pad.
  6. Spread the product evenly over a 2’ x 2’ panel, applying light-to-medium pressure in a crosshatch pattern. Once again, it’s important to use the appropriate speed and pad for the type of polisher that you’re using.
  7. Finally, remove any excess product with a clean, dry microfibre cloth.

IMPORTANT: Check product compatibility by testing on a small area first. Always try the least aggressive pad in order to deliver your desired results.


The revolutionary products in the Turtle Wax Hybrid Solutions Pro line bring the ‘wow’ factor, unparalleled durability, amazing levels of protection, cutting-edge compounds and so much more. To find out more about Turtle Wax and the company’s products, check out their full range on Halfords.com.